1. Please use the adapter and related accessories. 

2. Do not put the pump in the flammable, explosive and corrosive liquid. 

3. Do not use the pump in the water temperature above35°C. 

4. Maximum water depth 1.5M. 

5. Please refer to the reference table to use this product 

6. Do not immerse the plug into water or other liquid. 

7. Do not allow children or the inexperienced to operate the product alone without safety guarantee. 

Jecod Vario AC pump is a inspected and tested to ensure the safety and operating performance product. Please read this manual carefully, before operating correctly. In case of the improper usage, or maintenance to cause the pump damage. 

1. Sine Wave Technology, ultra quiet operation 

2. IC electronic detection, dry/locked rotor protection, automatic power-off protection upon no water. 

3. With wear resistant ceramic shaft, longer operation life. 

4. Fit for indoor and outdoor use. 

5. Fit for salt water and fresh water use. 

Used as submersible pump: the water level should exceed the inlet of the pump to avoid pumping the air.Add the filter sponge in the mesh/front cover to avoid the suction of sundries and affect the pump performance. The pump conjunction connector is designed with standard size thread, which can be connected to the common fountain heads and water pipes. ()Used as dry-use pump: the pump should be placed lower than the horizontal level to ensure water flowing into the water pump. Meanwhile, remove the front filter cover to connect the water pipe in inlet and outlet to ensure water in the pump and pipe before plug on. 

When use the pump, please pay attention to the position of the pump. Please connect the pump supply after finishing the installation. If the pump can't pump the water out for the first time which may be caused by the air in the pump body. Please try to plug off and re-plug on to vent the air. To ensure safety, please install a leakage switch with leakage current less than 30mA when using outdoor (the leakage switch shall be installed by the user self). 

1. Always disconnect the pump from the power supply before cleaning, maintenance and handling. 

2. Try to avoid the pump dry working. 

3. Do not lift the pump by holding the power cord only. In case of the cable connection off inside of the pump 

4. Do not use the pump in the heating liquid. 

5. The pump fits for both fresh water and marine water. 

6. The pump can be used as submersible pump and non-submersible, as long as ensure the pump filled with water 

7. The pump can't be used in the swimming pool. 8. This product has multiple protection function. When it enters the protection state, please plug off and plug on to recover the pump normal work. 

1. Adjustable the flow rate and head max. 

2. "Feed" model, Pause, Timing, delay, Restart function. 

3. Memory function: Pump works upon the latest parameters. 

Size
VAP-1200    10.5 x 21 x  12.5 cm.